Description

The LX H30-R2 3.0KW 1.5 inch Without Sensor Cable (L Shaped).

Volts: 230
Hz: 50
KW: 3.0
Amps: 13.6

Sensor compatibility: Controlled by the system control box
Material spec:
Required flow rate: Set by pressure switch, this switch will need to be pressurised, if it runs straight to a big bore outlet with no bends, there will be no back pressure and it may not work
Flow detection: Pressure switch built-in

Diameter: 50 mm

This unit replaces the Rooster heater as they kept failing. This heater is longer than the Rooster so you may need to alter the plumbing slightly