Description

The Balboa MRSPA1, 2 pump PCB is compatible with the M1 series control box. For use with panels from the duplex VL range such as the VL402 or VL404. Found in Leisurerite, Beachcomber 350, Canadian Spas, Cal Spa and Hydropool amongst others.
Hot Tub Models: Ottawa amongst others.

This PCB is quite unique in that you can operate both pump 1 and pump 2 on the same jets button, it will click through 4 times – Jets 1 low speed – Jets 1 high speed – Jets 2 on – Jets 1 off – all off.

Please note image is for illustration purposes only please contact us regards this pcb board.

This PCB is used as a replacement for an existing MRSPA1 control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.

Pump 1: Dual speed
Pump 2: Single speed
Air Blower: Yes
Heater: Yes
Ozone: Yes
Light: 12 volt
Sensor style: Pre M7 2-prong harness
Pressure Switch: Yes

Length: 170 mm (including tabs)
Height: 155 mm