Description

The Balboa BP2100G1 + TP800 (Balboa Retrofit Kit 5.2).

• • System Outputs:
  • Pump 1 230VAC
  • – 2-Speed 12A max 15-minute timer for High Speed, 15-Minute timer for Low Speed

– 1-Speed in Setups 12, 14, 17

• This is the heater pump in Setups 1–6, 15, 18
• Must deliver 20 GPM through heater
• Pump 2 230VAC
• – 2-Speed 12A max 15-minute timer
• – 1-Speed in Setups 5, 6, 11–14, 17, 18
• Pump 3 230VAC
• – 2-Speed 12A max 15-minute timer 2-Speed in Setups 1, 7
• – 1-Speed in Setups 2, 5, 6, 8, 11–16
• – Unused in Setups 3, 4, 9, 10, 17, 18
• Blower 230VAC
• – 1 Speed 4A max 15-minute timer
• – Unused in Setups 1, 2, 4, 6–8, 10, 13, 14
• Circ Pump 230VAC
• – 1-Speed 2A max Programmable Filtration Cycles + Polling
• This is the heater pump in Setups 7–14, 16, 17
• Must deliver 20 GPM through heater
• Ozone 230VAC .5A max
• – Slaved to Circ Pump in Setups 7-14, 16, 17
• – Independent in Setups 1-6, 15, 18
• Spa Light 10VAC On/Off 1A max 240-minute timer.
• A/V (Stereo) 230VAC Hot 5A max Always on
• Heater 3.0kW @ 240VAC max

The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.

This system has been designed to be able to run from the comfort of your home or whilst you are at work or away. With the addition of the new WiFi receiver the BP2100 can be operated via Android®, iPhone®, iPod touch® or iPad®

This is a generic unlicensed control box. This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.

Dimensions:

Length: 500 mm (inc heater) 330 mm (box only)
Width: 120 mm
Height: 300 mm
Topside: 250 mm x 90 mm

Items included: Balboa BP2100, Balboa TP800 Topside Control, 1 x BP2X-WIRE KIT BLOWER, 3 x WIRE PUMP 2 SPEED, 3 x WIRE PUMP SINGLE SPD, 3 x AMP cable with 3 pins 2000mm cable, 1 x SPA LIGHT ASSY W/O LENS